The National Brass Mako Machine head comes assembled but without tube, grip or needle bar. The Mako machine has a brass milled frame with a slot for adjusting the position of the binding post. It has the Swing-Gate style tube holding device for easy changing of tubes and needle bars. "NATIONAL" is engraved on the side of the frame. This is another one of National's real solid, heavy-duty machines.

Approximate weight, without tube: 6 wrap=8.5 oz. 8 wrap=9.25 oz. MADE IN THE U.S.A.

The following parts come standard on the National Mako Machine. Use this list as a reference when looking for replacement parts.

TH25-6S 1" Coils 3/8" core 6 Wrap, Top-Hat style (Liner)
MA25-6S 1" Coils 3/8" core 6 Wrap, Original style (Liner)
PTH25-6S 1" Coils 3/8" core 6 Wrap, Pre-Soldered, Top-Hat Style(Liner)
PMA25-6S 1" Coils 3/8" core 6 Wrap, Pre-Soldered, Original Style(Liner)
TH25-8S 1" Coils 3/8" core 8 Wrap, Top-Hat style (Shader)
MA25-8S 1" Coils 3/8" core 8 Wrap, Original style (Shader)
PTH25-8S 1" Coils 3/8" core 8 Wrap, Pre-Soldered, Top-Hat Style(Shader)
PMA25-8S 1" Coils 3/8" core 8 Wrap, Pre-Soldered, Original Style(Shader)
NMA33S Stainless Steel Binding Post with 8-32 Silver Contact Screw
NMA34S 8-32 Silver Contact Screw
NMA33A Stainless Steel Rear Post
MA50 47uf Capacitor on Shaders
MA49 22uf Capacitor on Liners
SHMA41 Front Spring-Short, Medium (.018)-w/o Contact Pt.(Gap.050)(Liner)
SHR21 Rear Spring-Long, Thick (.020)(Liner)
SHMA86 Front Spring-Short, Thin (.015)-w/o Contact Pt. (Gap.080)(Shader)
SHR42 Rear Spring-Long, Medium (.018)(Shader)
EMA31 Oversized Armature bar on Shader
MA31 Armature bar on Liner
MA32 Yoke
FSMA FSMA series (5 5/8" total length) Needle Bars
MA59M Medium O-Rings (pack of 30)
SPRING-C Stainless Steel Spring Cap
NMA51SS Stainless Steel Socket Cap Screw 8-32x3/8" for rear springs (30)
MA53SSL Stainless Steel Socket Cap flat head coil screws 8-32x5/8" (30)
SGFHSS Stainless Steel Flat Head screw for swing-gate arm 6-32x3/8" (30)
NMA38SS Stainless Steel Wing nut with 8-32 screw