Rebuild kits include everything you need to rebuild your machine. Rebuild kits DO NOT include frame, coils, tube, grip or needle bar.

Deluxe Rebuild Kit Includes:
8/32 Wingnut Screw
Armature bar
Capacitor
Yoke
Binding Post (6-32 Silver)
Ground post
Rear post
2 front springs
Rear spring
Two 8/32 x 5/8" coil screws
8-32 x 3/8" screw with large washer
6/32 x 3/8" screw (S.G. arm)
One "O" ring
One 1/2 grommet
Coil tubing

MADE IN THE U.S.A.

The following parts come standard on the National Deluxe Machine. Use this list as a reference when looking for replacement parts.

TH25-6 1 1/4" Coils 3/8" core 6 Wrap, Top-Hat style (Liner)
MA25-6 1 1/4" Coils 3/8" core 6 Wrap, Original style (Liner)
PMA25-6 1 1/4" Coils 3/8" core 6 Wrap, Pre-Soldered, Original Style(Liner)
PTH25-6 1 1/4" Coils 3/8" core 6 Wrap, Pre-Soldered, Top-Hat Style(Liner)
TH25-8 1 1/4" Coils 3/8" core 8 Wrap, Top-Hat style (Shader)
MA25-8 1 1/4" Coils 3/8" core 8 Wrap, Original style (Shader)
PMA25-8 1 1/4" Coils 3/8" core 8 Wrap, Pre-Soldered, Original Style(Shader)
PTH25-8 1 1/4" Coils 3/8" core 8 Wrap, Pre-Soldered, Top-Hat Style(Shader)
MA33S Stainless Steel Binding Post with 6-32 Silver Contact Screw
MA34S 6-32 Silver Contact Screw
MA33A Stainless Steel Rear Post
DRGP Stainless Steel Rear Ground Post
MA50 47uf Capacitor on Shaders
MA49 22uf Capacitor on Liners
SHMA41 Front Spring-Short, Medium (.018)-w/o Contact Pt.(Gap.050)(Liner)
SHR22 Rear Spring-Short, Thick (.020)(Liner)
SHMA86 Front Spring-Short, Thin (.015)-w/o Contact Pt. (Gap.080)(Shader)
SHR43 Rear Spring-Short, Medium (.018)(Shader)
MA31 Armature bar MA32 Yoke
DMA DMA series (5 7/8" total length) Needle Bars
MA59M Medium O-Rings (pack of 30)
SPRING-C Stainless Steel Spring Cap
NMA51SS Stainless Steel Socket Cap Screw 8-32x3/8" for rear springs (30)
MA53L Socket Cap flat head coil screws 8-32x5/8" (30)
NMA38SS Stainless Steel Wing nut with 8-32 screw