Rebuild kits include everything you need to rebuild your machine. Rebuild kits DO NOT include frame, coils, tube, grip or needle bar.

Brass Mako Rebuild Kit Includes:

8/32 Wingnut Screw
Armature bar
Capacitor
Yoke
Binding Post (8-32 Silver)
Rear post
2 front springs
Rear spring
Rear Post
Coil tubing
Two coil screws
8-32 x 3/8" screw with large washer
6-32 x 3/8" (SG Arm)
One "O" ring
1/2 Grommet .

The following parts come standard on the National Mako Machine. Use this list as a reference when looking for replacement parts.

TH25-6S 1" Coils 3/8" core 6 Wrap, Top-Hat style (Liner)
MA25-6S 1" Coils 3/8" core 6 Wrap, Original style (Liner)
PTH25-6S 1" Coils 3/8" core 6 Wrap, Pre-Soldered, Top-Hat Style(Liner)
PMA25-6S 1" Coils 3/8" core 6 Wrap, Pre-Soldered, Original Style(Liner)
TH25-8S 1" Coils 3/8" core 8 Wrap, Top-Hat style (Shader)
MA25-8S 1" Coils 3/8" core 8 Wrap, Original style (Shader)
PTH25-8S 1" Coils 3/8" core 8 Wrap, Pre-Soldered, Top-Hat Style(Shader)
PMA25-8S 1" Coils 3/8" core 8 Wrap, Pre-Soldered, Original Style(Shader)
NMA33S Stainless Steel Binding Post with 8-32 Silver Contact Screw
NMA34S 8-32 Silver Contact Screw
NMA33A Stainless Steel Rear Post
MA50 47uf Capacitor on Shaders
MA49 22uf Capacitor on Liners
SHMA41 Front Spring-Short, Medium (.018)-w/o Contact Pt.(Gap.050)(Liner)
SHR21 Rear Spring-Long, Thick (.020)(Liner)
SHMA86 Front Spring-Short, Thin (.015)-w/o Contact Pt. (Gap.080)(Shader)
SHR42 Rear Spring-Long, Medium (.018)(Shader)
EMA31 Oversized Armature bar on Shader
MA31 Armature bar on Liner
MA32 Yoke
FSMA FSMA series (5 5/8" total length) Needle Bars
MA59M Medium O-Rings (pack of 30)
SPRING-C Stainless Steel Spring Cap
NMA51SS Stainless Steel Socket Cap Screw 8-32x3/8" for rear springs (30)
MA53SSL Stainless Steel Socket Cap flat head coil screws 8-32x5/8" (30)
SGFHSS Stainless Steel Flat Head screw for swing-gate arm 6-32x3/8" (30)
NMA38SS Stainless Steel Wing nut with 8-32 screw