The National Deluxe Swing-Gate machine head comes assembled but without tube, grip or needle bar. The National Deluxe Swing-Gate Model was designed after the old Jonesy Machine for those who like the feel of a good solid heavy-duty machine in their hand but also want the swing-gate design for ease of changing tubes and needle bars.

Approximate weight, without tube: 9.5 oz.

MADE IN THE U.S.A.

The following parts come standard on the National Deluxe Swing-Gate Machine. Use this list as a reference when looking for replacement parts.

TH25-6 1 1/4" Coils 3/8" core 6 Wrap, Top-Hat style (Liner)
MA25-6 1 1/4" Coils 3/8" core 6 Wrap, Original style (Liner)
PMA25-6 1 1/4" Coils 3/8" core 6 Wrap, Pre-Soldered, Original Style(Liner)
PTH25-6 1 1/4" Coils 3/8" core 6 Wrap, Pre-Soldered, Top-Hat Style(Liner)
TH25-8 1 1/4" Coils 3/8" core 8 Wrap, Top-Hat style (Shader)
MA25-8 1 1/4" Coils 3/8" core 8 Wrap, Original style (Shader)
PMA25-8 1 1/4" Coils 3/8" core 8 Wrap, Pre-Soldered, Original Style(Shader)
PTH25-8 1 1/4" Coils 3/8" core 8 Wrap, Pre-Soldered, Top-Hat Style(Shader)
MA33S Stainless Steel Binding Post with 6-32 Silver Contact Screw
MA34S 6-32 Silver Contact Screw
MA33A Stainless Steel Rear Post
DRGP Stainless Steel Rear Ground Post
MA50 47uf Capacitor on Shaders
MA49 22uf Capacitor on Liners
SHMA41 Front Spring-Short, Medium (.018)-w/o Contact Pt.(Gap.050)(Liner)
SHR22 Rear Spring-Short, Thick (.020)(Liner)
SHMA86 Front Spring-Short, Thin (.015)-w/o Contact Pt. (Gap.080)(Shader)
SHR43 Rear Spring-Short, Medium (.018)(Shader)
MA31 Armature bar
MA32 Yoke
DMA DMA series (5 7/8" total length) Needle Bars
MA59M Medium O-Rings (pack of 30)
SPRING-C Stainless Steel Spring Cap
NMA51SS Stainless Steel Socket Cap Screw 8-32x3/8" for rear springs (30)
MA53L Socket Cap flat head coil screws 8-32x5/8" (30)
SGFHSS Stainless Steel Flat Head screw for swing-gate arm 6-32x3/8" (30)
NMA38SS Stainless Steel Wing nut with 8-32 screw